Equity 30240 Operating Manual

Operation: When the clock plugged in, the display will blink on and off meaning the correct time needs
to be set.
Auto Dimmer: The display brightness is automatically adjusted according to the amount of light in the
room. The display brightness will automatically dim when the room darkens. The light sensor is located
under the front grill.
Setting the Time:
1. Press and hold the Time Button
2. Press the Hour Button until the correct hour is displayed. Remember to set the correct
AM/PM (PM indicator will light up for the PM time)
3. Press the Minute Button until the correct minute is displayed
4. Release the Time Button once the time has been set.
Setting and Operating the Alarm:
1. Press and hold the Alarm Button
2. Press the Hour Button and then the Minute Button (MIN) to set the desired wake up time.
Remember to set the correct AM/PM (PM indicator will light up for the PM time)
3. Release the Alarm Button once the alarm time has been set
4. Slide the Alarm ON/OFF switch to ON to activate the alarm (Alarm Indicator will light up on
the display)
Super Loud LED Alarm Clock
MODEL 30240
OPERATING MANUAL