Table of Contents
Advertisement
Redirection Support [Disabled]
Allows you to enable or disable the redirection function. Configuration options: [Disabled]
[Enabled]
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot]
Returns to normal boot on the next boot after AC power loss.
[Fast Boot]
Accelerates the boot speed on the next boot after AC power loss.
Boot Logo Display [Auto]
[Auto]
Adjust automatically for Windows® requirement.
[Full Screen]
Maximize the boot logo size.
[Disabled]
Hide the logo during POST.
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] or [Full Screen]. This item
allows you to select the desired additional POST waiting time to easily enter the BIOS setup.
You can only execute the POST delay time during Normal Boot. The values range from 0 to
10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This item allows you
to select a desired post report waiting time. Configuration options: [1 sec] ~ [10 sec] [Until
Press ESC].
Bootup NumLock State [Enabled]
[Enabled]
Sets the power‑on state of the NumLock to [Enabled].
[Disabled]
Sets the power‑on state of the NumLock to [Disabled].
Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Option ROM Messages [Force BIOS]
[Force BIOS]
The third‑party ROM messages will be forced to display during the boot
sequence.
[Keep Current]
The third‑party ROM messages will be displayed only if the third‑party
manufacturer had set the add‑on device to do so.
Interrupt 19 Capture [Disabled]
This item allows you to trap Interrupt 19 by the option ROMs. Configuration options:
[Disabled] [Enabled]
ASUS Q170M2/CDM/SI
2‑39
Advertisement
Table of Contents
