Table of Contents
Advertisement
BIOS Hotkey Pressed [Off]
This item allows you to enable or disable this function. Configuration options: [On] [Off]
MEBx Selection Screen [Off]
This item allows you to enable or disable this function. Configuration options: [On] [Off]
Un-Configure ME [Off]
Sets this item to [Disabled] to unconfigure AMT/ME without using a password or set it to
[Enabled] to use a password. Configuration options: [On] [off]
System Agent (SA) Configuration
VT-d [Disabled]
Allows you to enable or disable VT‑d function on MCH. Configuration options: [Enabled]
[Disabled]
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the Primary
Display. Configuration options: [Auto] [CPU Graphics] [PCIE] [PCI]
iGPU Multi-Monitor [Disabled]
Allows you to enable the iGPU Multi‑Monitor. Set this item to [Enabled] to empower
both integrated and discrete graphics. The iGPU shared system memory size will be
fixed at 64MB. Configuration options: [Disabled] [Enabled]
RC6(Render Standby) [Auto]
Allows you to enable or disable render standby support. Configuration options:
[Disabled] [Auto]
DVMT Pre-Allocated [32M]
Allows you to select DVMT 5.0 Pre_Allocated (Fixed) Graphics Memory size used by
the Internal Graphics Device. Configuration options: [32M] [64M] [96M] ~ [1024M]
DMI/OPI Configuration
Allows you to control various DMI/OPI functions.
DMI Max Link Speed [Auto]
Allows you to set the DMI speed. Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PEG Port Configuration
Allows you to configure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Allows you to configure the PCIEX16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
2‑30
Chapter 2: Getting started
Advertisement
Table of Contents
