Table of Contents
Advertisement
Available languages
Available languages
Intended use
• Do not bring the system outer foil into contact with hard objects.
Doing so may damage the blades as they are very thin and
deform easily.
• Do not dry the main unit with a dryer or a fan heater.
Doing so may cause malfunction or deformation of the parts.
• Do not leave the shaver exposed to direct sunlight with the foil
frame detached.
Doing so may deteriorate the waterproof rubber and degrade
waterproof function, which may cause to malfunction.
• Store the shaver in a place with low humidity after use.
Failure to do so may cause malfunction due to condensation or rust.
• Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or hot
water. Do not soak the shaver in water for a long period of time.
• The following symbol indicates that a specific detachable power
supply unit is required for connecting the electrical appliance to
the supply mains. The type reference of power supply unit is
marked near the symbol.
8
Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide over
the skin more easily.
5 Foil frame release buttons
6 Power switch
7 Lamp display
a. Shaving sensor lamp
(
)
Back
a
b
c
d
b. Battery capacity lamp
c. Switch lock lamp (
)
d. Charge status lamp
(
)
8 Appliance socket
9 Outer foil section
: System outer foil release
buttons
; Inner blades
< Trimmer
= Trimmer handle
Advertisement
Chapters
Table of Contents
