Faq; Troubleshooting - Panasonic ES CV50 Operating Instructions Manual

►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil,
preventing complete attachment to the foil
frame.
2. Align the foil frame mark (
( ) and securely attach together until it clicks.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
System outer foil
Replacement parts for
ES‑CV50
Inner blades
14
) to the front,
) and the system outer foil mark
WES9177
WES9170

FAQ

Question
Will the battery deteriorate
if not used for an
extended period of time?
Can I charge the shaver
after every use?
Why should the adaptor be
disconnected after charge?
What is the constituent of
the dedicated oil?
Why does the appliance
beep twice after switched
off?

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The power switch does
not turn ON.
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more than 1
hour will not affect battery
performance, but disconnect the
adaptor for safety and to save energy.
Constituent of the oil is liquid paraffin.
The sound indicates that the
battery capacity is running low.
Please charge the appliance.
Action
Unlock the switch lock.
(See page 11.)