Honda Accord 2013 Owner's Manual page 521

Main Menu
uuReplacing Light BulbsuBrake/Taillight and Rear Turn Signal Light/Rear Side Marker Light Bulbs
Brake/Taillight and Rear Turn Signal Light/Rear Side
Marker Light Bulbs
When replacing, use the following bulbs.
Models with LED type brake/taillight
Brake/Taillight: LED
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker Light: LED
Models with bulb type brake/taillight
Brake/Taillight/Rear Side Marker Light: 21/5 W
Rear Turn Signal Light: 21 W (Amber)
Holding Clip
Bulb Socket
Bulb *
* Not available on all models
520
Table of Contents
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket to the left and remove it.
3. Remove the old bulb and insert a new bulb.
Socket *
1Brake/Taillight and Rear Turn Signal Light/Rear Side Marker Light
Bulbs
Models with LED type brake/taillight
Brake/taillight and rear side marker light bulbs are
LED type. Have an authorized Honda dealer inspect
and replace the light bulbs.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Clip
Insert the clip with the pin raised, and push until it is
flat.
Push until the
pin is flat.