Replacing Light Bulbs - Honda Accord 2013 Owner's Manual

Main Menu

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: LED type
Low beam headlight: 55 W (H11 for halogen bulb type)
■
High Beam Headlight
Holding Clip
Tube
Holding Clips
* Not available on all models
Table of Contents
*
*
Driver side
6-cylinder models
1. Unlock the holding clips, then remove the
upper part of the air intake duct and the air
intake tube.
Passenger side
All models
1. Remove the engine coolant reservoir.
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk or tow a trailer, have the
aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights' inside lenses (headlights, brake
lamps, etc.) may fog temporarily after a car wash or
while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by a dealer.
Continued 513