Adding an additional device
To add an additional device:
1.
Connect the cables from the device to your Slingbox.
2.
Place at least one IR Blaster on each device as shown. The emitter end of
the IR Blaster can either go above the infrared sensor, as shown, or below.
(See your Quick Start Guide for more information on doing this properly.).
3.
Go to the Window menu and select Slingbox Directory.
4.
On the left side of the Slingbox Directory window, click the Slingbox that
the new device is connected to.
5.
On the right side of the window, click Edit.
6.
The Slingbox Info window opens.
7.
Click Configuration, and then click Change Audio/Video Setup.
8.
The Slingbox Setup Assistant opens.
9.
Follow the onscreen instructions.
10.
When you're finished, click Done.
Switching between inputs
While watching video from your Slingbox, go to the Slingbox menu, select Video
Input and then choose your input. SlingPlayer switches to the input that you selected
and displays the appropriate remote control.
The emitter end
of the IR Blaster
The infrared sensor
More SlingPlayer and Slingbox options • Page 58