Table of Contents
Advertisement
8.
Smart Ride Through (SmaRT) setting (3-pin SMART_PSU1)
This jumper allows you to enable or disable the Smart Ride Through (SmaRT) function.
This feature is disabled by default. Set to pins 1-2 to enable it. When enabled, SmaRT
allows uninterrupted operation of the system during an AC loss event.
9.
SATA DOM power setting (3-pin DOM1_PWR1, DOM2_PWR2)
This jumper allows you to configure the DOM power setting.
4-8
Chapter 4: Motherboard Information
Advertisement
Table of Contents
