Table of Contents
Advertisement
3.
Place the butterfly riser card on a flat
and stable surface.
4.
Remove the metal cover then set it
aside.
The default metal cover on the PCIE
x8 slot of the butterfly riser card is an
ASUS proprietary card bracket. It is
screwless by design allowing for easy
installation or removal.
5.
Prepare the ASUS PIKE II card.
If your expansion card is pre-installed
with a proprietary card bracket,
proceed to step 9.
6.
Remove the two screws on the ASUS
PIKE II card (A) then remove the card
bracket (B).
7.
Get the metal cover (proprietary card
bracket) that you removed earlier in
step 4.
8.
Secure the ASUS PIKE II card and the
metal cover with two screws.
2-18
metal cover
PCIE x8 slot
Chapter 2: Hardware Information
card bracket
metal cover
Advertisement
Table of Contents
