Table of Contents
Advertisement
16
Operating
AUTO POWER On/Off
This unit automatically turns on by an input source :
Optical or Bluetooth.
When you turn on your TV or an external device
connected to this unit, this unit recognizes the input
signal and selects the suitable function. You can hear
the sound from your device.
If you try to connect your Bluetooth device, this unit
turns on and is ready to pair. Connect your Bluetooth
device and play your music.
This function turns on or off when you press AUTO
POWER ON/OFF .
,
Note
3
y After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
y If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned on
by AUTO POWER function when optical signal
comes in after 5 seconds of no signal.
y Depending on the connected device, this
function may not operate.
y If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
y When you turn on this unit for the first time,
Auto Power function status is turned on.
Auto function change
This unit recognizes input signals such as optical
and Bluetooth. And then changes suitable function
automatically.
When optical signal comes in
When you turn on the external device connected to
this unit by an optical cable, this unit changes the
function to optical. You can hear the sound from your
device.
When you try to connect BLUETOOTH
device
When you try to connect your Bluetooth device to
this unit, the Bluetooth function is selected. Play
your music on the Bluetooth device.
,
Note
To change to optical function, it needs 5 seconds
of no signal.
Advertisement
Table of Contents
