Replacing The Power-Button Board; Procedures; Post-Requisites - Dell Inspiron 14 3000 Service Manual

Replacing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedures

1 Slide the power-button board under the tab on the palm rest and align
the screw hole on the power-button board with the screw hole on the
palm-rest assembly.
2 Replace the screw that secures the power-button board to the palm-rest
assembly.
3 Slide the power-button board cable through the slot on the palm-rest
assembly.
4 Turn the palm-rest assembly over.

Post-requisites

1 Follow the procedure from step 4 to step 11 in
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 6 in
4 Replace the base
5 Replace the battery.
computer. After working inside your
cover.
After working inside your
"Replacing the palm
"Replacing the hard
rest".
drive".
45