Z3 Technology Z3-DM8169-VI-RPS Instruction Manual page 20

+==============================================================
| T -- Stop
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| U -- Load User Settings
| W -- Save User Settings
| Y -- Load Factory Default Settings
+==============================================================
---- enter option:
13. On the encoder menu, press I to change the URL to your receiver's (We are using our Z3-MVP-02)
static IP, and then press "S" to start streaming
Now, control the Z3-MVP-02 system via serial port.
1. Plug-in serial cable and NULL modem connector from Z3-MVP-02 to PC's COM port
2. Setup teraterm on PC for 115k, 8, N, 1, 0ms/char, 100ms/line
3. Connect 12V Power supply to the Z3-MVP-02
4. Open up a console window
5. Connect an HDMI cable from the Z3-MVP-02 HDMI out to the HDMI in on a monitor
6. Power on the Z3-MVP-02
7. After booting up and running through the beginning of the sequence the H.264 decode demo menu will
appear. Below is a screenshot of the H.264 decode demo terminal console:
+==============================================================
| Z3 Technology, LLC DM8169-VI-RPS 1.03.00
+==============================================================
| + -- Set Device Name
| = -- Set Password
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 -- Operating Mode
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 1 -- Input Interface
| 2 -- Input format
| 3 -- RTP IP:Port
| 4 -- STC-PCR Offset(ms)
| 5 -- Output Interface
| 6 -- Display Resolution
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
S -- Start
R -- Refresh Menu
X -- Exit
[ DM8169-VI-RPS ]
[ BLANK ]
[ Decoder ]
[ Ethernet ]
[ RTP ]
[ 225.1.2.3:8888 ]
[ 0 ]
[ HDMI ]
[ 1080p-60 (1920x1080) ]
20
th ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
Z3-DM8169-VI-RPS
V1.03.00