Z3 Technology Z3-DM8169-VI-RPS Instruction Manual page 15

7. Connect HDMI out of Brite-View Box to the HDMI in of the TV One 3G SDI converter.
8. Connect Ethernet from Z3-DM8169-MOD to a PC.
9. Set the PC IP address to 192.168.1.110 – This is the default address the Z3-DMx8169-VI-RPS streams
to.
10. Connect 12V Power supply to the Z3-DM8169-MOD.
*Before powering up the Z3-DM8169-VI-RPS system, make sure the Brite-View Box and TV One
converter are running.
11. Open up a console window
12. Power on the Z3-DM8169-VI-RPS system
13. After booting up and running through the beginning of the sequence, a menu will appear. You will have
the option to manually change the mode of the system to encode or decode mode. Below is a
screenshot of a terminal console of the system in encode mode. To change the mode to decode mode,
press "M".
+==============================================================
| Z3 Technology, LLC DM8169-VI-RPS 1.03.00
+==============================================================
| + -- Set Device Name
| = -- Set Password
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 -- Operating Mode
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 1 -- Video Source
| 2 -- Audio Source
| 3 -- Audio Codec
| 4 -- Audio Bitrate
| 5 -- Video Resolution
| 6 -- Rate Control
| 7 -- Video Bitrate
| 8 -- Video Profile
| 9 -- Video Frame Rate
| A -- Gop Size
| B -- Video Burst Size
| C -- B-Frame GOP Structure
| D -- B-Frame Interval
| E -- B-Frame Temporal Layer
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
[ DM8169-VI-RPS ]
[ BLANK ]
[ Encoder ]
[ HDMI1 ]
[ Automatic ]
[ AAC-LC ADTS ]
[ 192 kbits ]
[ ]
[ VBR ]
[ 12000k ]
[ High ]
[ 60 ]
[ 60 Frames ]
[ 1000ms ]
[ open [IBB] ]
[ 3 ]
[ 1 ]
15
th ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
Z3-DM8169-VI-RPS
V1.03.00