Z3 Technology Z3-DM8169-VI-RPS Instruction Manual page 19

12. After booting up and running through the beginning of the sequence, a menu will appear. You will have
the option to manually change the mode of the system to encode or decode mode. Below is a
screenshot of a terminal console of the system in encode mode. To change the mode to decode mode,
press "M".
+==============================================================
| Z3 Technology, LLC DM8169-VI-RPS 1.03.00
+==============================================================
| + -- Set Device Name
| = -- Set Password
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 0 -- Operating Mode
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| 1 -- Video Source
| 2 -- Audio Source
| 3 -- Audio Codec
| 4 -- Audio Bitrate
| 5 -- Video Resolution
| 6 -- Rate Control
| 7 -- Video Bitrate
| 8 -- Video Profile
| 9 -- Video Frame Rate
| A -- Gop Size
| B -- Video Burst Size
| C -- B-Frame GOP Structure
| D -- B-Frame Interval
| E -- B-Frame Temporal Layer
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| F -- Output Interface
| G -- Video Passthru
| H -- Output Format
| I -- Dest IP Address
| J -- Dest Port
|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| K -- Local IP Address
| L -- Local Netmask
| M -- Default Gateway
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
[ DM8169-VI-RPS ]
[ BLANK ]
[ Encoder ]
[ HDMI1 ]
[ Automatic ]
[ AAC-LC ADTS ]
[ 192 kbits ]
[ ]
[ VBR ]
[ 12000k ]
[ High ]
[ 60 ]
[ 60 Frames ]
[ 1000ms ]
[ open [IBB] ]
[ 3 ]
[ 1 ]
[ Ethernet ]
[ HDMI ]
[ MPEG-2 TS ]
[ 225.1.2.3 ]
[ 8888 ]
[ 192.168.81.68 ]
[ 255.255.0.0 ]
[ 192.168.0.1 ]
19
th ST, STE 250 ♦ Lincoln, NE 68508-1369 U.S.A. ♦ +1.402.323.0702
Z3-DM8169-VI-RPS
V1.03.00