Yolink YS7106-UC User Manual page 8

C-2. Add Device
Ta p " " b u o n , t h e n s c a n Q R C o d e
1
o n t h e d e v i c e . F o l l o w t h e s t e p s t o a d d
t h e d e v i c e
Power the device
2
using the provided
power adapter
Power
SE T
Adapter
1. You will need to press the SET bu on once again if the device failed to connect to the cloud
2. Pressing the SET bu on at any other me a er this ini al process will result in the Alarm LED
blinking red, only. This indicates the device is connected to the cloud and is func oning normally
3. If the red LED does NOT blink as noted this may indicate a problem with the device Please see the
troubleshoo ng sec on and the contact sec on for technical support
Set the Power/Sound Level Switch
3
to High (H) or Medium (M) or Low
(L) level, the LED indicator will
blink several
green).
mes (red, then
SN: 7103123456
H
Power/Sound
M
L
OFF
Level Switch
5