Yolink Control-D2D - Yolink YS7106-UC User Manual

E. About Control-D2D
YoLink Control-D2D is our unique device-to-device control technology. Using YoLink Control-D2D
YoLink devices can be controlled without the Hub or an internet connec on. (Use of YoLink
Control-D2D is op onal; you can use the Automa on feature in the app OR use YoLink Control-D2D
but YoLink Control-D2D offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Water
Leak Sensor, while examples of a responder are a YoLink Siren Alarm or a YoLink Plug Mini
The Power Fail Alarm can only work as the controller of YoLink Control-D2D
E-1. Pairing
To c o n fi g u r e y o u r Po w e r Fa i l
1
A l a r m a s a c o n t r o l l e r, P r e s s
and hold the SET bu on for 5-10
seconds un l the LED quickly
blinks green, then, release the
bu on
b. SET Bu on
SET
(5-10 seconds)
15