Table of Contents
Advertisement
Quick Links
Velocity 8" Touch Panel
AT-VTP-800
The Atlona AT-VTP-800-BL and AT-VTP-800-WH are 8" touch panels in black and white,
respectively, for the Atlona Velocity™ Control System. They feature contemporary, refined styling
for modern presentation environments with 1280x800 native resolution, and a capacitive glass
surface that supports multi-touch and gesture interactions. These touch panels conveniently
install into a wall or furniture via a US two-gang opening. Also available is the optional AT-VTP-
TMK tabletop mounting kit for placement on a meeting table or lectern. The VTP-800-BL and
VTP-800-WH feature Power over Ethernet (PoE), enabling a single network connection for data
and power. Setting up the touch panels is effortless as the AV control GUI is automatically
uploaded from the Velocity Control Gateway processor during system configuration.
Package Contents
1 x AT-VTP-800
1 x Metal mounting plate
4 x Mounting screws
Operating Notes
•
The Velocity 8" Touch Panel (AT-VTP-800) must be on the same network as the Velocity
Gateway (AT-VGW-HW) or it will be unable to sync for control.
•
The AT-VTP-800 is PoE capable, to power the unit, simply plug it into a 802.3at compatible
network switch. If the network switch is not PoE capable, a PoE injector
can be used.
IMPORTANT: Velocity Gateway (AT-VGW-HW) must be set up before the AT-VTP-800 is
fully functional.
1 x Wall installation template
1 x 2-gang mud ring
1 x Installation Guide
1
Installation Guide
(purchased separately)
AT-VTP-800
Advertisement
Table of Contents
Related Manuals for Panduit ATLONA AT-VTP-800
Summary of Contents for Panduit ATLONA AT-VTP-800
- Page 1 Velocity 8” Touch Panel AT-VTP-800 The Atlona AT-VTP-800-BL and AT-VTP-800-WH are 8” touch panels in black and white, respectively, for the Atlona Velocity™ Control System. They feature contemporary, refined styling for modern presentation environments with 1280x800 native resolution, and a capacitive glass surface that supports multi-touch and gesture interactions.
-
Page 2: Mounting Instructions
Installation Guide AT-VTP-800 Mounting Instructions The AT-VTP-800 has two mounting options. In-wall or an optional stand (available through atlona. com). In-wall Use the included wall mount template to create a hole in the wall the correct 2-Gang size for the unit. Install the back box (not included) or mud ring (included) into the wall. - Page 3 Installation Guide AT-VTP-800 Stand Place the stand on the table/desk If the rubber no slip guard is not secure enough, use four wall screws and thread them though the four holes on the bottom of the unit and into the desk/table. Thread the Ethernet cable through the bottom rounded hole on the back of the stand and back out the rectangular hole on the front of the stand.
-
Page 4: Installation And Setup
Installation Guide AT-VTP-800 Installation and Set Up NOTE: Installation of the Velocity Touch Panel can only be done after Velocity has been set up. View the installation guides for VGW-HW/VGW-SW and Velocity Manual for instructions. Connect the Ethernet cable into the back of the unit. If the Ethernet cable is connected to a non PoE switch, use a PoE injector using 802.3at (purchased separately). - Page 5 Installation Guide AT-VTP-800 Navigate to the room the VTP will be located in. Select the + button to add the unit. Type the SKU into the search field and select the correct panel from the drop down. Select the Edit button on the tile to open the unit settings. Select the ADD button.
- Page 6 Installation Guide AT-VTP-800 Depending on the room options there may be multiple buttons on the home page. Select the any icon to open the room’s control page. NOTE: The room must be completely set up to receive the control interface. Select sources and displays by tapping on them or dragging and dropping the source on the display.
-
Page 7: Advanced Settings
Installation Guide AT-VTP-800 Advanced Settings Once the touch pad has been set up, the settings can be changed or reset only through the advanced settings. To access the settings, swipe from the left side of the touch pad to the right. Select Advanced Setup. -
Page 8: Firmware Updating
Installation Guide AT-VTP-800 Firmware Updating The touch panel can be updated from within its settings menu. To update, the panel must be connected to a network with internet access. Swipe from the left side of the touch pad to the right to open the gateway settings menu. Select the ABOUT VELOCITY button. -
Page 9: Select Gateway
Installation Guide AT-VTP-800 Manual Firmware Updating The AT-VTP uses a .tar.gz firmware that can be downloaded from the firmware section of https:// atlona.com/product/vtp-800/. Once downloaded follow these instructions to update the firmware. NOTE: When downloading the firmware file on a MAC, ensure that the file is not being auto-extracted. -
Page 10: Warranty
Installation Guide AT-VTP-800 Warranty To view the product warranty, use the following link or QR code: https://atlona.com/warranty/. English Declaration of Conformity The English version can be found under the resources tab at: https://atlona.com/product/vtp-800/. Chinese Declaration of Conformity 中国RoHS合格声明 由SKU列出於: https://atlona.com/about-us/china-rohs/. International atlona.com 408.962.0515...