Summary of Contents for Panduit Atlona Velocity AT-VTP-550
Page 1
Installation Guide AT-VTP-550 Velocity 5.5” Touch Panel AT-VTP-550 The Atlona AT-VSP-550-BL and AT-VTP-550-WH are 5.5” touch panels in black and white, respectively, for the Atlona Velocity™ Control System. They feature contemporary, refined styling for modern presentation environments with 720x1280 native resolution, and a capacitive glass surface that supports multi-touch and gesture interactions.
Installation Guide AT-VTP-550 Mounting Instructions The AT-VTP-550 can be mounted to a 1 gang back plate. Select the type of 1 gang back box to use and install into a wall. NOTE: Install using the region’s safety guidelines for electrical boxes. Thread the Ethernet cable through the 1 gang box.
Installation Guide AT-VTP-550 Installation and Set Up NOTE: Installation of the Velocity Touch Panel can only be done after the VGW-250 has been set up. View the AT-VGW-HW Installation Guide and Velocity Manual for instructions. Connect the Ethernet cable into the back of the unit. If the Ethernet cable is connected to a non PoE switch, use a PoE injector using 802.3at (purchased separately).
Page 4
Installation Guide AT-VTP-550 Scanning for Gateways Scanning for Gateways Velocity Device Setup Velocity Device Setup 10.0.0.234 Set Static IP Device Alias Velocity Touch Panel 550 IP Address 10.0.0.123 0.0.0.0 Subnet Mask 255.255.255.0 Alt. URL 0.0.0.0 Default Gateway 10.0.0.1 SCAN FOR GATEWAYS DNS Server 75.75.75.75 BACK...
Installation Guide AT-VTP-550 Velocity Device Setup Device Alias Velocity Touch Panel 550 10.0.0.234 10.0.0.234 SCAN FOR GATEWAYS BACK SAVE & CONTINUE Depending on the room options there may be multiple buttons on the home page. Select the any icon to open the room’s control page. NOTE: The room must be completely set up to receive the control interface.
Installation Guide AT-VTP-550 ADVANCED SETTINGS ADVANCED SETTINGS Set Configuration PIN Gateway Settings Gateway Settings (Note: Once a pin is set, it will be required to edit settings going 0.0.0.0 0.0.0.0 forward) (Enter a blank pin to remove) Alternate URL 0.0.0.0 Alternate URL 0.0.0.0 Device Settings...
Installation Guide AT-VTP-550 When the installation starts, it will switch to an Android update screen. Once completed it will restart the touch panel. The splash screen will appear, before the loading screen takes over. The update is complete when it returns to the control screen. This process can take up to 5 minutes to complete.
Page 8
Installation Guide AT-VTP-550 Atlona, Inc. (“Atlona”) Limited Product Warranty Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service. Under its Limited Product Warranty, Atlona, at its sole discretion, will either: •...
Installation Guide AT-VTP-550 Atlona, Inc. (“Atlona”) Limited Product Warranty Cont. Remedy Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they purchased their products. Atlona can also be contacted directly. Visit www.atlona. com for Atlona’s contact information and hours of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller or end-purchaser is provided before Atlona extends its warranty services.
Installation Guide AT-VTP-550 Atlona, Inc. (“Atlona”) Limited Product Warranty Cont. Exclusive Remedy To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are exclusive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied.