Table of Contents
Advertisement
Quick Links
Velocity System 8" Scheduling Touch Panel
AT-VSP-800-BL and AT-VSP-800-WH
The Atlona AT-VSP-800 is a Velocity System 8" scheduling touch panel. It features contemporary,
refined styling with 1280×800 native resolution, and a capacitive glass surface that supports
touch and gesture interactions. Bright LED lighting on the edge of the bezel is ideal for providing
a visual representation of room status in scheduling applications. This touch panel conveniently
installs into a wall or furniture via a one-gang US, UK, or EU opening. The VSP-800 features
Power over Ethernet (PoE), enabling a single network connection for data and power. Setting up
the touch panel is effortless as room scheduling and AV control GUIs are automatically uploaded
from the Velocity System hardware or software server gateway during system configuration.
Package Contents
1 x AT-VSP-800
1 x Metal 1-gang mounting plate
1 x Metal 2-gang US horizontal mounting plate
Operating Notes
•
The Velocity 8" Scheduling Touch Panel (AT-VSP-800) must be on the same network as the
Velocity Gateway (AT-VGW-HW-3/10/20) or it will be unable to sync for scheduling.
•
The AT-VTP-800 is PoE capable, to power the unit, simply plug it into a 802.3af compatible
network switch. If the network switch is not PoE capable, a PoE injector
can be used.
IMPORTANT: Velocity Gateway (AT-VGW-HW-3/10/20) must be set up before the AT-
VSP-800 is fully functional.
4 x Mounting screws
1 x Installation Guide
1
Installation Guide
AT-VSP-800-BL and AT-VSP-800-WH
(purchased separately)
Advertisement
Table of Contents
Related Manuals for Panduit ATLONA AT-VSP-800 Series
Summary of Contents for Panduit ATLONA AT-VSP-800 Series
- Page 1 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Velocity System 8” Scheduling Touch Panel AT-VSP-800-BL and AT-VSP-800-WH The Atlona AT-VSP-800 is a Velocity System 8” scheduling touch panel. It features contemporary, refined styling with 1280×800 native resolution, and a capacitive glass surface that supports touch and gesture interactions.
-
Page 2: Mounting Instructions
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Mounting Instructions The AT-VSP-800 can be mounted to a 1 gang back plate. Select the type of 1 gang back box to use and install into a wall. NOTE: Install using the region’s safety guidelines for electrical boxes. Thread the Ethernet cable through the 1 gang box. - Page 3 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH US back box: 1-gang Vertical installation 2-gang Horizontal installation To install the touch panel in landscape orientation in a wall the US 2-gang installation plate should be used. Use the 4 included screws to install the unit into the back box.
-
Page 4: Installation And Setup
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH EU back box: NOTE: For horizontal installation, turn the unit and mounting plate on its side. The same back box can be used. Installation and Set Up NOTE: Installation of the Velocity Touch Panel can only be done after the AT-VGW- HW-3/10/20 has been set up. - Page 5 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH When the unit displays the IP information, press CONTINUE. If the touch panel does not display an IP, select the Set Static IP slider. Assign the unit a static IP. Ensure there are no other devices on the network with the same IP to avoid connection issues.
- Page 6 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH On a network computer, use a browser to log into Velocity. A green message will appear at the top right corner of the screen. Select Buildings. On the buildings screen, press the Synchronize button on the building the touch panel is located.
-
Page 7: Advanced Settings
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Advanced Settings Once the touch pad has been set up, the settings can be changed or reset only through the advanced settings. To access the settings, swipe from the left side of the touch pad to the right. Select Advanced Setup. -
Page 8: Firmware Updating
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Firmware Updating The touch panel can be updated from within its settings menu. To update, the panel must be connected to a network with internet access. Swipe from the left side of the touch pad to the right to open the gateway settings menu. Select the ABOUT VELOCITY button. -
Page 9: Troubleshooting
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Troubleshooting Problem Cause Solution My touchpad won’t power The touchpad is not • Connect the touchpad to a connected to a PoE switch. switch that supports 802.3at PoE. • If a PoE switch is not available, use a PoE injector (sold separately) to power the unit. - Page 10 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Atlona, Inc. (“Atlona”) Limited Product Warranty Cont. Coverage Periods Atlona Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on the end-purchaser ‘s sales or delivery receipt is the proof purchase date. Limited Product Warranty Terms –...
-
Page 11: Limitation On Liability
Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Atlona, Inc. (“Atlona”) Limited Product Warranty Cont. Disclaimers This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible with any other current product, technology or any future products or technologies in which Atlona’s products may be used in conjunction with. - Page 12 Installation Guide AT-VSP-800-BL and AT-VSP-800-WH Toll free US International atlona.com 877.536.3976 41.43.508.4321 • • © 2020 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners.