Table of Contents
Advertisement
Available languages
Available languages
The base of cookware must have a minimum diameter relevant to the diameter
of the cooking zone you use the cookware on.
3.4 How to start cooking
1. Touch the ON/OFF sensor. When the power is on, a
beep sounds once; the display indicates - or --. The
appliance is in stand-by mode now..
2. Place a cookware on the desired cooking zone. Always
keep the bottom of the cookware as well as the cooking
zone clean and dry.
3. Select the power level by touching the
COOKING ZONE
4. Set the power level with the + and - sensor.
a. When you do not set a power level within 1 minute, the
appliance will switch off automatically. You have to start
at step 1 again.
b. You can change the power level whenever you want
while cooking..
3.5 How to stop cooking
1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the - sensor
to 0. Check that the indicator displays 0 and then H.
3. Switch off the appliance with the O
4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the H for saving energy when starting a
sensor.
SELECTION OF
-sensor of the
/O
-sensor.
N
FF
37
Advertisement
Table of Contents
