yuna Calor EBK2 Instruction Manual page 33

 The appliance must be supplied with an adequate flow of fresh air from outside
the cabinet to the base of the hob.
 If the hob is installed above an oven, the oven must be equipped with a cooling
system.
 Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
 The circuit breaker must be easily accessible.
Installation of the fixing brackets
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
4. The wall and the reach of the heat radiation above the worktop must
be made of heat-resistant materials.
5. To avoid any damage, the sandwich layer and adhesive must resist
heat.
A
Screw
1. Place the appliance on a stable and smooth surface (use the packaging).
2. Do not exert any physical force to the control elements.
3. You have to fix the brackets (2 left/2 right).
4. Insert the appliance into the installation opening.
B
bracket
33
C
Screw hole Bottom of housing
D