Connecting A Tv - Yamaha YSP-900 Owner's Manual

Connecting a TV

You can connect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET
MENU.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 14).
Note
If you connect this unit to the analog audio and optical digital audio output jacks at the same time as shown in the left illustration below,
the digital audio signals output at the optical digital output jack take priority over the analog audio signals output at the analog audio
output jacks.
Digital and analog audio connections
TV
Analog audio Optical digital
output output
R L
VCR TV/STB SUBWOOFER VIDEO
AUDIO INPUT
OUT
Cables used for connections
Audio pin cable
(White)
(Red)
Optical cable (supplied)
Remove the caps if
attached
Check the direction
Rear panel of this unit
DVD
TV/STB AUX
OPTICAL
COAXIAL
DIGITAL INPUT
(White)
(Red)
Video connections
Video
input
VCR TV/STB SUBWOOFER VIDEO
AUDIO INPUT
OUT
Cables used for connections
OSD video pin cable (supplied)
(Yellow)
CONNECTIONS
TV
Rear panel of this unit
DVD
TV/STB AUX
OPTICAL COAXIAL
DIGITAL INPUT
(Yellow)
15
En