Remote Control Lever; Neutral Interlock Trigger - Yamaha Z300A 2003 Owner's Manual

1. Power trim and tilt switch

2. Remote control lever

3. Neutral interlock trigger

4. Neutral throttle lever
5. Main switch / choke switch
6. Engine stop lanyard switch
7. Throttle friction adjuster
1. Remote control lever
2. Power trim and tilt switch
3. Free accelerator
4. Throttle friction adjuster
EMU26190
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the le-
ver back from neutral engages reverse. The
engine will continue to run at idle until the le-
ver is moved about 35° (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
Basic components
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
6. Throttle
7. Fully open
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
6. Throttle
7. Fully open
EMU26200
Neutral interlock trigger
To shift out of neutral, first pull the neutral in-
terlock trigger up.
8