Table of Contents
Advertisement
1. SAFETY RULES
1. To avoid possible electric shock, turn
off the electricity at the main fuse box or
circuit panel before you begin the fan
installation or before servicing the fan or
installing accessories.
2. Read all instructions and safety
information carefully before installing
your fan and save these instructions.
3. Make sure all electrical connections
comply with local codes or ordinances as
well as the National Electrical Code. If
you are unfamiliar with electric wiring,
please use a qualified and licensed
electrician.
4. Make sure you have a location selected
for your fan which allows clear space for
the blades to rotate, and at lease seven (7)
feet of clearance between the floor and
the fan blade tips.
2. UNPACKING YOUR FAN
Unpack your fan and check the contents. Do not discard the carton. If warranty replacement
or repair is ever necessary the fan should be returned in original packaging. Remove all
parts and hardware. Do not lay motor housing on its side - because the decorative casing
may shift. Check all visible screws, bolts and nuts for tightness. Examine all parts. The
following parts should be included:
1. Set of blades (a)
2. Blade support plates (for 60" fan only) (b)
3. Hanger/mounting bracket (c)
4. Ceiling canopy (d)
5. Canopy cover (e)
6. Downrod assembly (4" for 52" fan and 6" for 60" fan) (f)
7. Fan motor assembly (g)
8. Mounting plate (h)
9. Light kit assembly (i)
10. Glass shade (j)
11. 2 x 9 Watts LED bulbs (k)
12. Pull chain knob (l)
13. Parts bags (m) containing:
Blade attachment hardware (screws/washers, washers may be
attached to screws)
Mounting hardware (wire nuts, wood screws, machine screws,
lock washers, spring washers, metal washers.)
14. Blade balancing kit (n)
IF YOU FIND THAT PARTS ARE MISSING. CONTACT YOUR DEALER FOR REPLACEMENT, OR CALL QUORUM DIRECTLY AND WE WILL MAIL REPLACEMENTS TO YOU IMMEDIATELY.
5. The outlet box and ceiling support
joist used must be securely mounted, and
capable of supporting at least 35 pounds.
To reduce the risk of fire, electric shock,
or personal injury, use only an outlet box
clearly labeled "Acceptable For Fan
Support".
6. To reduce the risk of personal injury
use only approved hanging brackets and
screws supplied with the outlet box for
mounting to the outlet box.
7. After installation is complete, check
that all connections are absolutely secure.
8. Do not insert anything into the fan
blades while they are rotating.
9. Do not operate the reverse switch until
the fan has come to a complete stop.
10. Do not attempt to control the operation
of the fan (or an optional light kit) from
any wall control that is not approved by
Quorum for use with its fans. Do not use
solid state wall controls. The use of any
unapproved control voids the fan's warranty.
TOOLS REQUIRED
FOR INSTALLAITON
Phillips Screwdriver
Wire Cutters
Electrical Tape
Step Ladder
NOTE:
Some Quorum fan models will have slightly
different parts than what is shown here
depending upon the design you have chosen.
Basic installation procedures are similar for
all models.
c.
a.
d.
e.
f.
g.
h.
i.
b.
Model #20523-xx: 14.99 lbs
20524-xx: 18.94 lbs
20603-xx: 19.53 lbs
20604-xx: 22.62 lbs
j.
k.
l.
m.
n.
Advertisement
Table of Contents
