System Specifications - FibroPool FH135 Installation And User Instructions Manual

Specification
1.
s
82'F Air 82'F Water 82% RH
60'F Air 75'F Water 65%RH
Setting temperature range (Heating)
Setting temperature range (Cooling)
Running (Air) temperature range
Refrigerant type/quantity (Oz)
Packing dimension LxWxH (inch)
The technical specification of our heat pumps is provided for informational purpose only. We
reserve the right to make change without notice in advance.
Performance varies greatly depending on the weather conditions.
Ratings based on US Dept Of Energy guidelines, 82-82-82 / 80-80-80/ 78-78-78
1.
US Dept Of Energy recommends pool water temperatures 78, 80, or 82 Degrees.
2.
FH 135 is engineered and optimized based on US Dept Energy recommendations.
3.
We do not calibrate or size the heaters above 82'F pool water temperatures.
4.
55 dB noise at 10 feet, complies with Directives EN ISO 3741 and EN ISO 354
5.

System Specifications

Model
Max Heating capacity (Btu/h)
Max Power input (Btu/h)
Heating capacity (Btu/h)
Power supply
Max power input (Btu/h)
Max current (A)
Air side heat exchanger
Water side heat exchanger
Water flow (gpm)
Net dimension LxWxH (inch)
Net weight (lbs)
Packing weight (lbs)
Noise level dB(A)
Water proof level
Water pipe connection
Inlet/Outlet
COP
Power input (Btu/h)
COP
FH135
34,700
7200
5.56
33440
8360
4.01
110-125V/60Hz
7200
15.7
60°F～99°F
50°F～82°F
45°F～115°F
R410A/ 16 Ozs
Hydrophilic fin exchanger
Titanium tube heat exchanger
33 GPM
37 x 14 x 25
41 x 17 x 33
78 lbs
98
47
IPX4
PVC Sch 40 1-1/2"
V.23.02 FIBROPOOL USA