Table of Contents
Advertisement
3.
Put your finger on the tab near the
front of the softener cover and pull
it up to remove it from the detergent
drawer.
4.
Wash out the detergent residue with
water.
Use a cloth to wipe the water from the
appliance.
5.
Replace the softener cover.
6.
Reinsert the detergent drawer while
pressing down on the middle of the
softener cover.
Instructions for the B type
1.
Pull the detergent drawer until it will
not move anymore.
2.
Then jiggle it until it is fully extended.
over
NA-107VC6_WHK_Eng.indb 29
Maintenance
3.
Move the detergent drawer up and
down while pulling it out to remove it.
4.
Pull your finger on the tab near the
front of the softener cover then pull
it up to remove it from the detergent
drawer.
5.
Wash out the old detergent with
water.
Use a cloth to wipe the water from the
appliance.
6.
Replace the softener cover.
7.
Reverse the procedures to reinsert
the detergent drawer.
Maintenance - 29
2018-8-1 15:03:13
Advertisement
Table of Contents
