Table of Contents
Advertisement
Fresh food features
US
14
CA
Dairy shelf
The dairy shelf provides con venient door storage for spreadable
items such as butter and margarine. On select models, this
compartment can be moved to several different locations to
accommodate storage needs.
To remove:
Slide dairy shelf up and pull out.
To install:
Slide assembly in and down so that the hooks are firmly seated
on the door liner.
To remove dairy door:
Press in sides of dairy door and pull out.
To install dairy door:
Slide sides of dairy door inside dairy shelf until hinge points snap
into place.
Beverage Chiller
The Beverage Chiller keeps beverages and other items colder
than the rest of the fresh food compartment. An air inlet directs
air from the freezer into the chiller.
Controls
The Beverage Chiller Control is the top dial located on the left
wall of the fresh food compartment. Turn the outer part of the
dial clockwise to increase air flow, and decrease the temperature
of the Beverage Chiller.
To remove Beverage Chiller:
Unload the Beverage Chiller.
Slide the assembly up and pull straight out.
Note: if the Beverage Chiller is installed directly under the dairy
shelf or a door bucket, the bucket or dairy shelf will need to be
removed before removing the chiller.
To install Beverage Chiller:
Align one of the air inlet holes on the side of the Beverage Chiller
with one of the hole cut-outs on the door.
Slide the assembly in and down so that the hooks are firmly
seated on the door liner.
Note: the Beverage Chiller will not operate properly if the air inlet
hole is not aligned with the control location.
All manuals and user guides at all-guides.com
Fig.10 Dairy shelf and door
Fig.11 Beverage Chiller
Fig.12 Beverage
Chiller Control
Advertisement
Table of Contents
