Making The Initial Settings; Test Run - Mitsubishi Electric BAC-HD150 Instruction Manual

Bm adapter

Table of Contents

CAUTION • Install the LAN cable before installing the unit, and route the cable in the same way as the M-NET transmission

lines.

• Connect the BAC-HD150 to a private network. Use a security device such as a VPN router when connecting to

the Internet. (Without a proper security measure in place, the air conditioning system is vulnerable to access

from unauthorized users.)

6 Making the initial settings

Note

Refer to the BAC-HD150 Instructions Book and the Setting Tool Instructions Book for how to make the initial

settings for the BAC-HD150.

Refer to the PAC-YG50ECA Installation/Instructions Manual for how to use the expansion controller.

1. Turning on the power

Disconnect the LAN cable for connection to the BACnet

There is a possibility that the IP address of the unit is already used by another device that is connected to the BACnet

2. Initial settings

Make the initial setting using the Setting Tool after turning on the power to the BAC-HD150.

Some of the items that require initial settings include BAC-HD150 address and air conditioning system related items.

• IP address of BAC-HD150 (The factory setting for LAN1 is "192.168.1.254." The factory LAN2 setting is "192.168.200.212".)

• M-NET address of BAC-HD150 (The factory setting is "0.")

• Group configuration for the air conditioning system

Refer to the BAC-HD150 Instructions Book and the Setting Tool Instructions Book for detailed instructions for how to make the

initial settings.

Note

Refer to the BAC-HD150 Instructions Book and the Installation Manuals that came with the air conditioning units for

how to perform a test run for the BAC-HD150.

 Refer to the Installation Manuals that came with the air conditioning units for how to perform a test run.

 Perform a test run for the Mitsubishi Electric air conditioning system and confirm proper operation before connecting to the

building management system and performing a test run. (Refer to the BAC-HD150 Instructions Book for details.)

before turning the power on for the first time.

- 21 -

Table of Contents