Empire Comfort Systems White Mountain Hearth Tahoe DVCX42FP30P Installation Instructions And Owner's Manual page 2

Direct-vent zero clearance gas fireplace heater
Table of Contents

Advertisement

1.
Read the safety information on Pages 64 - 66.
2.
If located in the Commonwealth of Massachusetts, please note the special requirements on Page 67.
3.
Where are you going to install the unit? See Pages 8-10 & 14.
4.
Frame the opening. See Page 16.
5.
Install the gas lines. See Page 13.
6.
Install the wiring. See Pages 15, 46, and 53.
7.
Install the venting. See Pages 11-12.
8. Install the fireplace. See Pages 16-19.
9. Connect the gas. See Page 13.
10. Connect the electricity. See Page 15.
11. Connect the venting system. See Page 20.
12. Install the optional remote system. See Page 46 for Millivolt Systems and Page 52 for Intermittent Pilot Systems.
13. Install the logs. See Page 32 - 43.
14. Light the fireplace and troubleshoot. See Pages 47 - 48 for Millivolt Systems and 54 - 57 for Intermittent Pilot Systems.
15. Install trim and other accessories. See Page 7.
16. Show the homeowner how to operate the fireplace.
17. Show the homeowner how to do the basic maintenance.
Page 2
BEFORE YOU START
39634-2-0720

Advertisement

Table of Contents
loading

Table of Contents