Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume - Siemens Gigaset C590 User Manual

Press the display key.
§Save§
When the screensaver conceals the dis-
play, briefly press a to show the idle
display.
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. After doing this, only
one entry instead of multiple entries can
be shown at the same time on each dis-
play and names are shortened where nec-
essary.
Ï
¢ ¢
v
Display
Press display key (³= on).
§Change§
Setting the colour scheme
You can set the display to have a dark or
light background.
Ï
¢ ¢
v
Display
Select Colour Scheme 1
and press .
§OK§
•
Setting the display backlight
Depending on whether or not the handset
is in the base/charging cradle, you can
activate or deactivate the lighting. If it is
activated, the display is permanently
dimmed.
Ï
¢ ¢
v
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select On or Off.
Out of Charger
Select or Off.
On
Please note
With the setting, the standby
On
time of the handset can be signifi-
cantly reduced.
Press the display key.
§Save§
¢
Large Font
¢
Colour Schemes
or Colour Scheme 2
¢
Backlight
•
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the base/charging cradle with-
out having to press the talk key c.
Ï
¢ ¢
v
Telephony
Press display key (³= on).
§Change§
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece vol-
ume to five different levels.
In idle status:
t
Call up the
menu.
r
Set the earpiece volume.
s
Scroll to the
r
Set the speaker volume.
Press the display key if neces-
§Save§
sary to save the setting perma-
nently.
Setting the volume during a call:
t
Press the control key.
r
Select volume.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key
If t is assigned to another function,
¢
e.g. call swap ( page 30):
Open menu.
§Options§
Select and press
Volume
Configure setting (see above).
Please note
You can also set the call volume using
¢
the menu ( page 26).
Handset settings
¢
Auto Answer
Handset Volume
Speaker: line.
.
§Save§
.
§OK§
55