Table of Contents
Advertisement
Making calls
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
u
Your network provider supports CLIP,
CLI.
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
played.
u
You have requested CLIP from your net-
work provider.
u
The caller has requested CLI from the
network provider.
Call display with CLIP/CLI
If the caller's number is saved in your
directory, the caller's name will be dis-
played.
Ø«Ú
1234567890
Accept
Silence
1 Ringtone icon
2 Number or name of caller
The following is displayed in place of the
number:
u
External, if no number is transmitted.
u
Unavailable, if the caller has not
requested Calling Line Identification.
28
1
2
Speaker mode
In speaker mode, instead of holding the
handset to your ear you can put it down,
for example on the table in front of you.
This allows others to participate in the call.
Activating/deactivating speaker mode
Activating while dialling
~ d
Enter the number and press
the speaker key.
¤
You should inform your caller before
you use the speaker function so that
they know someone else is listening.
Switching between earpiece and speaker
mode
d
Press the speaker key.
During a call, activate or deactivate
speaker mode.
If you wish to place the handset in the
base/charging cradle during a call:
¤
Press and hold the speaker key d
while placing the handset in the base.
For instructions on how to adjust the loud-
¢
speaker volume,
Switching to mute
You can deactivate the microphone in
your handset during an external call.
h
Press key to mute the handset.
The display shows
is
off.
Press the key again to reacti-
vate the microphone.
Please note
If the telephone is muted, all keys
except the mute key h and the
end-call key a will not work.
page 55.
Microphone
Advertisement
Table of Contents
