Siemens Gigaset C590 User Manual page 13

First steps
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – using your right
thumb apply pressure to the
centre of the belt clip, push the
fingernail of your left index fin-
ger between the clip and the
casing and lift the clip upwards.
Placing the handset in the base/charging cradle
¤
Place the handset in the base/charging cradle with its display facing
forward.
Each handset is registered with the base at the factory. You do not need to com-
plete a registration. If you wish to use your handset with a different base or use
further handsets with your base, you will have to register the handset manually
¢
page 48.
To charge the batteries, leave the handset in the base/charging cradle.
Please note
Only place the handset in the base/charging cradle that is intended for it.
12