Do you have a question about the DVB400 and is the answer not in the manual?
Questions and answers
Marion Borruso
March 2, 2025
Why won’t the receiver not reading USB
1 comments:
Mr. Anderson
March 2, 2025
The August DVB400 receiver is not reading the USB because the newer version of the device runs different software and has a different user interface, making it incompatible with recordings from the older version. Additionally, attempts to record on a brand-new USB memory stick after formatting it using the built-in FORMAT command resulted in an "Unknown Error," indicating a potential issue with the recording function on the newer model.
Page 1
DVB400 Set Top Box Set Up Guide Plugging In Channel Scan Recording TV...
Page 2
Check You Have All the Components • DVB400 Set Top • HDMI Cable • Instruction Manual • Remote Control (Under Card Flap Inside) • Batteries • UK / EU Plug...
Page 3
Connecting your Device Connect the Power Adapter to a mains outlet and the rear of the DVB400...
Page 4
Connecting your Device Connect the HDMI or SCART to the DVB400 and to your TV / Display...
Page 5
Connecting your Device Connect an aerial cable to the RF IN port to receive signal from your aerial No Aerial Cables need to connect to your TV!
Page 6
Connecting your Device Insert the batteries into the remote and Power On the Set Top Box...
Page 7
First Time Set Up and Channel Scan The Device will launch the Installation Guide Make sure Language is Correct and Press "Channel Search"...
Page 8
First Time Set Up and Channel Scan Wait for the scan to complete...
Page 9
Recording with a USB Insert a USB Stick This menu will open (Minimum 32GB) or External Hard Drive (Maximum 1TB) into the front of the box Press the Menu Button...
Page 10
Recording with a USB Navigate to the Media Player Menu and Down to PVR Settings Now Select Recording Device and Check Your Device Appears...
Page 11
Recording with a USB If you see "USB Device Not Found" you may need to reformat the USB device, change to a different USB device, or re- insert the device...
Page 12
Recording with a USB Navigate back to the Media Player and PVR Settings menu then select "Format" This is where you can scroll between NTFS and FAT32. If recording for longer periods or a recording fails, reformat the drive to NTFS...
Page 13
Recording with a USB You can now use the REC button to Record live or scheduled TV!
Page 14
To talk to one of our team about your product please call us on: +44 1920 48 77 70 To email us with an issue please use our customer service address: service@idaffodil.co...
Need help?
Do you have a question about the DVB400 and is the answer not in the manual?
Questions and answers
Why won’t the receiver not reading USB
The August DVB400 receiver is not reading the USB because the newer version of the device runs different software and has a different user interface, making it incompatible with recordings from the older version. Additionally, attempts to record on a brand-new USB memory stick after formatting it using the built-in FORMAT command resulted in an "Unknown Error," indicating a potential issue with the recording function on the newer model.
This answer is automatically generated