Advertisement
Quick Links
Advertisement
Related Manuals for August DVB400
Summary of Contents for August DVB400
- Page 1 Set-Up Guide August DVB400 Single-Tuner Set Top Box...
- Page 2 Check You Have All the Components • DVB400 Set Top Box • HDMI Cable • Instruction Manual • Remote Control • Batteries • UK / EU Plug...
-
Page 3: Connecting Your Device
Connecting your Device Connect the Power Adapter to a mains outlet and the rear of the DVB400... - Page 4 Connecting your Device Connect the HDMI or SCART to the DVB415 and to your TV / Display...
- Page 5 Connecting your Device Connect an aerial cable to the RF IN port to receive signal from your aerial No Aerial Cables need to connect to your TV!
- Page 6 Insert the batteries into the remote and Power On the Set Top Box...
- Page 7 The Device will launch the Installation Guide Make sure Language is Correct and Press "Channel Search"...
- Page 8 Wait for the scan to complete...
- Page 9 Set Up Recording with a USB Insert a USB Stick This menu will open (Minimum 32GB) or External Hard Drive (Maximum 1TB) into the front of the box Press the Menu Button...
- Page 10 Set Up Recording with a USB Navigate to the Media Player Menu and Down to PVR Settings Now Select Recording Device and Check Your Device Appears...
- Page 11 Set Up Recording with a USB If you see "USB Device Not Found" you may need to reformat the USB device, change to a different USB device, or re-insert the device...
- Page 12 Set Up Recording with a USB Navigate back to the Media Player and PVR Settings menu then select "Format" This is where you can scroll between NTFS and FAT32. If recording for longer periods or a recording fails, reformat the drive to NTFS...
- Page 13 Set Up Recording with a USB You can now use the REC button to Record live or scheduled TV!
- Page 14 For a full explanation of all features, please refer to the manual...
Need help?
Do you have a question about the DVB400 and is the answer not in the manual?
Questions and answers
PURCHASED A LONGER HDMI LEAD AND WHEN INSTALLED ON SCREEN MESSAGE SAYS "NO SIGNAL" ??????
The August DVB400 may show "no signal" after installing a longer HDMI lead because longer HDMI cables can cause signal degradation or loss, especially if they are of poor quality or exceed recommended lengths. This can result in the set-top box failing to transmit a stable signal to the TV. To resolve this, try using a shorter or higher-quality HDMI cable.
This answer is automatically generated