Installation - Kohler Wellworth K-3423 Installation Instructions Manual

ROUGHING-IN
A
1"
Y
12"
C L OF OUTLET
116

INSTALLATION

TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a
sponge to remove the remaining water from the tank and
bowl. Disconnect the supply shut-off valve (if present),
and remove the old tank and bowl.
Remove the old gasket from the floor and closet flange
with a putty knife. Remove the old T-bolts and discard
them.
NOTICE: If the new toilet is not installed immediately,
temporarily stuff a rag into the closet flange.
BA
113786-2- (9521)
K-3422
K-3423
K-4620 Tank
K-4512 Tank
H
15"
9"
3/8" I.P.S. SUPPLY
Fig. #1
2
A
28-3/4"
26-3/4"
H
28-1/2"
32"
19-5/8"
FRONT OF BOWL
X
Closet Flange
Fig. #2
B
15-3/4"
14-1/4"
X Y
5-3/4" 3-1/8"
4-1/8" 3-5/8"
B
6-1/8"
9-5/8"
Kohler Co., Kohler, WI