Table of Contents
Advertisement
This chapter is about how to maintain the " eco fea-
tures" of the machine as originally developed by our
engineers, the correct use of this machine and han-
dling of waste oil and fuel.
1. Research on the 4 stroke engine has been devel-
oped in order to produce lower fuel consump-
tion and low emission of polluting exhaust gases
2. Use of the machinery: During the fuel filling oper-
ation particular care should be taken to avoid
DISPLACEMENT (cm3)
BORE AND STROKE (mm)
ENGINE OUTPUT (Kw)
ENGINE SPEED AT MAX POWER (min-1)
MAXIMUM SPEED, NO LOAD (min-1)
MINIMUM SPEED (min-1)
BLADE SHAFT SPEED (min-1)
BLADE LOCKING NUT TIGHTENING TORQUE (Nm)
DRY WEIGHT (kg)
FUEL TANK CAPACITY (cm3)
SOUND PRESSURE LEVEL (AT THE OPERATOR'S EAR) LpAav (dBA) (ISO7917)
GUARANTEED NOISE LEVEL LwAav (dBA) (ISO 10884)
MEASURED SOUND POWER LEVEL LwAav (dBA) (ISO 10884)
VIBRATIONS LEVEL STRING HEAD (ISO 7916) (m/s2) MAX-MIN
VIBRATIONS LEVEL BLADE (ISO 7916) (m/s2) MAX-MIN
Check STOP switch is in the posi-
tion I.
Control fuel level min. 25%tank
capacity.
Check air filter is clean.
Remove spark plug, dry it, clean it
and adjust it, and replace it, if nec-
essary.
Change fuel filter. Contact your deal-
er.
Carefully follow the cutting accesso-
ry assembly instructions.
Check metal cutting accessory is
sharp. Otherwise, contact your deal-
er.
Engine still gives trouble: contact your dealer.
O. Ecology
waste fuel polluting the enviroment.
3. When storing for a long period, empty fuel tank
and run engine until dry, observing the same pre-
cautions as when filling.
4. Disposal of machines: Old machines can be very
dangerous for the environment - do not throw
them awway!! Please apply to the compotent
body authorised to collect industrial waste. As
prescribed by National laws on enviroment
Technical data
34
38x30
1,2
8.000
10.000
2.800
7.700
17
7,1
900
97
114
113
8,2-1,6
8,2-1,6
Fault finding table
Engine will Engine runs badly
not start
•
•
•
•
38
42
40x30
41x32
1,3
1,6
8.000
8.000
10.000
10.000
2.800
2.800
7.700
7.700
17
17
7,3-8,3 PRO 7,4-8,4 PRO-8,8 BP 7,7-8,7 PRO-10,8 BP
900
900
97
97
114
114
113
113
8,2-1,7
10,55-1,8
8,2-1,7
16,38-1,8
or looses power
when cutting
•
•
•
•
46
43x32
1,8
8.200
11.000
2.800
8.500
17
900
106
114
113
12,5-1,06
17,79-1,06
The machine
runs but does
not cut well
•
•
ENGLISH - 7
Advertisement
Table of Contents
