Ringer Setting; Own Greeting - Siemens C70 User Manual

42 Setup
Screensaver
The screensaver shows a picture in
the display when a period set by you
has elapsed. An incoming call and/or
pressing any key will end the func-
tion except if the safety function is
activated.
Note
The "picture" (animated) and "digital clock"
screensavers significantly reduce the
phone's standby time.
Start up anim.
Shown when the phone is switched
on.
Shutdn anim.
Shown when the phone is switched
off.

Own greeting

Is displayed instead of an animation
when you switch on the phone.
Big letters
You can choose between two font
sizes for the display.
Illumination
Set display illumination to
brighter/darker.
Contrast
Set display contrast.
Ringtones
¢ ¢
Ringtones
C
T
¢
Select function.
Set the signal tones on the phone to
suit your requirements.

Ringer setting

Activate/deactivate the ringer or
reduce it to a short beep.
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The vibration alarm can be
switched on in addition to the ring-
tone. This function is deactivated
when the battery is being loaded
and accessories are connected
(except the headset).
Volume
Set different volumes for types of
call/functions.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Assign ringtone
A ringtone which has already been
selected will be played or the list of
possible ringtones will be displayed
for selection.