Direct Call - Siemens C70 User Manual

46 Setup
Data services
Default setting and activation of the
connection profiles for
applications. The phone default set-
ting varies from service provider to
service provider. Consult your serv-
ice provider or go to this address in
the Internet for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult you service provider
or go to this address on the Internet
for more information
www.siemens.com/
mobilephonescustomercare in the FAQ
section.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
MMS, WAP
Security
¢ ¢
Security
C
T
¢
Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used
accidentally. However, you can still
be called and you can still make an
emergency call.
Additional information
Block/unblock in standby mode.
In each case:
Press and hold.
#

Direct call

Only one phone number can be
dialled. The required phone code
(4 to 8 digits) is set by you and
entered at the first security prompt.
To switch off, press and
#
hold, then enter the
phone code.