Installation; Installation Precautions - Sinclair SDV6 User And Installation Manual

Installation

Carefully read this manual before installing the IDU.
1

Installation Precautions

Qualification and Safety Regulation Requirements
Warning
Please carry out the installation according to local standards.
Ask your local dealer or professionals to install the product.
This unit must be installed by professional technicians with relevant specialized knowledge. Users
MAY NOT install the unit themselves; otherwise, faulty operations may cause the risks of fire,
electrical shock, injury, or leakage, which could harm you or others or damage the air conditioner.
Never modify or repair the unit on your own.
Otherwise, a fire, electric shock, injury or water leakage may occur. Get your local dealer or a
professional to do so.
Ensure that the residual current device (RCD) is installed.
The RCD must be installed. Failure to install it may result in electric shock.
When powering the unit, follow the regulations of the local electric company.
Make sure that the unit is grounded reliably in accordance with laws. If the grounding is not
completed correctly, it may cause electrical shock.
When moving, disassembling or reinstalling the air conditioner, get the assistance of your
local dealer or a professional.
If installed improperly, fire, electrical shock, injury, or water leakage may occur.
Use the optional accessories specified by our company.
The installation of these accessories must be carried out by professionals. Improper installation
may cause fire, electrical shock, water leakage and other hazards.
Use only power cables and communication cables that meet specification requirements.
Properly connect all the wiring to make sure that no external forces are acting on the
terminal blocks, power cables and communication cables. Improper wiring or installation
may cause a fire.
The air conditioner must be grounded. Check whether the earth line is securely connected
or broken. Do not connect the ground line to gas cans, water piping, lightning rods or
telephone earth lines.
The main power switch of the air conditioner should be put in a position that is out of the
reach of children.
It should not be obstructed by flammable objects such as curtains.
Open flames are prohibited when refrigerant leaks are present.
If the air conditioner is not cooling/heating properly, this may be caused by a refrigerant leak. If this
occurs, contact your local dealer or a professional.
The refrigerant in the air conditioner is safe, and usually does not leak. If there is refrigerant leakage
in the room, it is easy for a fire to occur after contact with the heating units of the heater/electric
stove/stove. Please disconnect the power supply of the air conditioner, extinguish the flames of
appliances that produce a flame, and open the windows and doors of the room to allow ventilation
and ensure that the concentration of refrigerant leakage in the room does not exceed a critical level;
keep away from the leakage point, and contact the dealer or professional personnel.
After the refrigerant leakage is repaired, do not start the product until the maintenance
personnel confirms that the leakage is fully repaired.
13
Installation