Table of Contents
Advertisement
USING HEADPHONES
1. Insert your headphones into the headphone socket on the control housing.
Connecting stereo headphones automatically disconnects the loudspeaker.
Headphones give slightly more sensitivity as they reduce external noises which
can interfere with your ability to detect objects.
CAUTION: SET THE VOLUME TO THE LOWEST LEVEL BEFORE PUTTING ON
THE HEADPHONES. THEN ADJUST THE VOLUME TO A COMFORTABLE
LEVEL.
CAUTION: CAUTION: DO NOT WEAR HEADPHONES WHEN OPERATING
NEAR ROADS OR TRAFFIC.
TROUBLESHOOTING
FALSE SIGNALS
• If you are getting false signals from electrical cables, try to lower the
sensitivity.
• The metal detector can give a false reading in areas which have a high
mineral content. In this case lower both the sensitivity and the threshold
and hold the search coil slightly higher than normal.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste at the end of its
life. This product contains valuable raw materials and should be disposed of
appropriately at a recognized disposal facility.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
7
Advertisement
Table of Contents
