Download Print this page

Ballard Designs LO484 Manual page 3

Outdoor led illuminated oval

Advertisement

CHARGING PROCESS:
STEP 1: Before use, charge battery for 6 - 8 hours (or until fully charged). Place Charging Station (B)
onto dry, indoor, level surface then insert small plug on External Adapter (C) into port on side of
Charging Station. Next, gently insert and fully seat plug into nearest electrical outlet.
STEP 2: Wipe down and fully dry surface of Charging Station (B) and Light (A) BEFORE charging.
Carefully set Light onto Charging Station. Indicator light is RED while charging and GREEN when
battery is fully charged.
1
WARNING - SHOCK HAZARD!
Never charge product in pool, water or
rain. Charge in a dry, indoor location!
MANUALLY OPERATING LIGHT: (On base of Light (A))
White Light: Press and hold on/off button for 3 seconds.
Colors: Press for 1 second to activate color changing mode. No individual color selection.
Turn Off: Press and hold on/off button for 3 seconds.
REMOTE CONTROL OPERATION: (Range approximately 13 to 26 feet )
First, remove small plastic sheet from battery cover before use. To extend battery life, replace
cover when remote is not in use.
ON: Press for 1 second to turn light on.
OFF: Press for 1 second to turn light off.
FLASH: Colors flash red-green-blue.
FADE: Colors fade up/down through 16 colors. This mode uses the most battery life/shortest run time.
SMOOTH: Colors slowly transition through red-green-blue. This mode has the longest run time.
BRIGHT +/-: Press "+" for brighter light. Press "-" for less light.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
2
i
Full Charge: Approximately *6 -8 hours
Run Time: Approximately *4 - 6 hours depending on color mode.
*Approximate time based on battery life/age.
Cleaning and Care
Peridiocally rinse with clean water. Towel dry.
Always turn off when not in use.
Read all instructions and warnings/Retain for future reference.
WARNING - SHOCK HAZARD!
Wipe down and fully dry Light and
Charging Station before charging.
i
Reduce charging time by switching
light off during process.
(Example)
RED = Charging
GREEN = Fully Charged
Page 3 of 3

Advertisement

loading