Ballard Designs LO484 Manual

Outdoor led illuminated oval

Download this manual

PRODUCT NAME: Outdoor LED Illuminated Oval

ITEM NUMBER: LO484

ASSEMBLED DIMENSIONS: LRG 10.6"H x 13.8"L

IMPORTANT SAFETY INSTRUCTIONS:

- These assembly/use instructions are provided for your safety. Please read fully and carefully.

- Do not use sphere if cracked, damaged or otherwise compromised.

- This is not a toy. Do not jump, stand, sit or use sphere as a float.

- The external adapter is for exclusive use for charging this fixture. Do not use for any other purpose.

- Do not expose external adapter to rain, humidity or any other liquid. Charge sphere INDOORS.

- Disconnect external adapter from outlet when not in use.

WARNING:

- Deviation from assembly instructions may cause risk of fire or electric shock.

- Prevent electric shock or product damage: DO NOT OPEN LAMP BASE.

- THIS IS NOT A TOY. Keep out of reach of children.

- NEVER CHARGE LAMP IN RAIN, WATER, MOISTURE. CHARGE LAMP INDOORS ONLY.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 9-21-2022

MED 7.9"H x 13.8"L

SML 6.3"H x 11"L

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

Page 1 of 3

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Outdoor LED Illuminated Oval ITEM NUMBER: LO484 ASSEMBLED DIMENSIONS: LRG 10.6”H x 13.8”L MED 7.9”H x 13.8”L SML 6.3”H x 11”L IMPORTANT SAFETY INSTRUCTIONS: - These assembly/use instructions are provided for your safety. Please read fully and carefully.
Page 2 HARDWARE AND COMPONENTS INCLUDED: Prevent accidentally discarding small parts or (EXAMPLE) hardware. Retain all carton contents until assembly and installation are complete. 1 - Remote Control (D) (Parts bag located Approved Location for Use: Indoor and Outdoor Environment here) ENVIRONMENTAL PROTECTION: The symbol on the product dictates that Waste electrical products should not be disposed of with household waste.
Page 3 CHARGING PROCESS: STEP 1: Before use, charge battery for 6 - 8 hours (or until fully charged). Place Charging Station (B) onto dry, indoor, level surface then insert small plug on External Adapter (C) into port on side of Charging Station. Next, gently insert and fully seat plug into nearest electrical outlet. STEP 2: Wipe down and fully dry surface of Charging Station (B) and Light (A) BEFORE charging.