Advertisement
Quick Links
PRODUCT NAME: Klein Easel Lamp
ITEM NUMBER: LA291
ASSEMBLED DIMENSIONS: 31"H x 11.25"W x 8"D
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 35 Watt MAX Type GU10 Bulb (not included).
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1-5-2020
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA
Page 1 of 3
Advertisement
Summary of Contents for Ballard Designs Klein Easel
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Klein Easel Lamp ITEM NUMBER: LA291 ASSEMBLED DIMENSIONS: 31”H x 11.25”W x 8”D IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
- Page 2 Unplug lamp prior to installation or removal. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until assembly and installation are complete. Approved Location for Use: Dry Indoor Environment Assembly Time: 10 Minutes HARDWARE AND COMPONENTS...
- Page 3 Unplug lamp prior to installation or removal. ADJUST/POSITION LAMP: Keys Lamp designed to articulate at pivot points. Gently loosen key, resposition, then retighten key. Pivot Points CAUTION: Do not over-tighten. Easel Brackets designed to move up and down on Lamp Body. To adjust, gently loosen knurled thumb screw, move bracket up/down, then retighten screw.