Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 11-3169 Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the I/O board on the palmrest and keyboard assembly.
2 Align the screw hole on the I/O board with the screw hole on the
palmrest and keyboard assembly.
3 Replace the screw that secures the I/O board to the palmrest and
keyboard assembly.
4 Slide the power and volume-buttons board, sensor board and I/O-board
cables into their respective slots on the I/O board and press down on the
latches to secure the cables.

Post-requisites

1 Follow the procedure from step 3 to step 4 in
2 Replace the battery.
3 Replace the base
38
computer. After working inside your
cover.
After working inside your
"Replacing the hard drive".