Table of Contents
Advertisement
Suunto Spartan Sport
3.23. Notifications
If you have paired your watch with the Suunto app, you can receive notifications such as in-
coming calls and text messages on your watch.
When you pair your watch with the app, notifications are on by default. You can turn them off
from the settings under Notifications.
When a notification arrives, a pop-up appears on the watch face.
If the message doesn't fit on the screen, swipe up to scroll through the full text.
Notification history
If you have unread notifications or missed calls on your mobile device, you can view them on
your watch.
From the watch face, press the middle button and then press the lower button to scroll
through the notification history.
The notification history is cleared when you check the messages on your mobile device.
3.24. Pairing PODs and sensors
Pair your watch with Bluetooth Smart PODs and sensors to collect additional information, such
as cycling power, when recording an exercise.
Suunto Spartan Sport supports the following types of PODs and sensors:
Heart rate
•
Bike
•
Power
•
Foot
•
NOTE: You cannot pair anything if airplane mode is on. Turn off airplane mode before
pairing. See 3.2. Airplane mode.
To pair a POD or sensor:
1. Go to your watch settings and select Connectivity.
2. Select Pair sensor to get the list of sensor types.
3. Swipe down to see the whole list and tap on the sensor type you want to pair.
4. Follow the instructions in the watch to complete pairing (refer to sensor or POD manual if
needed), pressing the middle button to advance to the next step.
29
Advertisement
Table of Contents
