Calibrating Compass; Setting Declination - Suunto SPARTAN SPORT 2.6 User Manual

Table of Contents

Advertisement

Suunto Spartan Sport
Heading cardinal
Heading in degrees
Time of day (local time) or battery level; tap on screen to change views
To exit the compass, swipe right or keep the middle button pressed.
While you are in the compass display, you can swipe up from the bottom of the screen or
press the lower button to open a list of shortcuts. The shortcuts give you quick access to
navigation actions such as checking the coordinates of your current location or selecting a
route to navigate.
Swipe down or press the upper button to exit the list of shortcuts.

3.8.1. Calibrating compass

If the compass is not calibrated, you are prompted to calibrate the compass when you enter
the compass display.
If you want to re-calibrate the compass, you can start the calibration again from the settings
under Navigation » Calibrate compass.

3.8.2. Setting declination

To ensure correct compass readings, set an accurate declination value.
Paper maps point to true north. Compasses, however, point to magnetic north – a region
above the Earth where the Earth's magnetic fields pull. Because magnetic North and true
North are not at the same location, you must set the declination on your compass. The angle
in between magnetic and true north is your declination.
The declination value appears on most maps. The location of magnetic north changes yearly,
so the most accurate and up-to-date declination value can be found from websites such as
www.magnetic-declination.com).
Orienteering maps, however, are drawn in relation to magnetic north. If you are using an
orienteering map, you need to turn the declination correction off by setting the declination
value to 0 degrees.
You can set your declination value from the settings under Navigation » Declination.
16

Advertisement

Table of Contents
loading

Table of Contents