Hose - Hoover UH71250V Owner's Manual

HOSE

To reduce the risk of personal injury - Unplug before cleaning or servicing.
How to Clean
4.25 To remove hose for tool use, press the hose release button (A) and pull
hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean out hose as they
can cause damage. To lock back into place, push hose into hose tube until you hear a click.
POWERED HAND TOOL:
(Tool varies per model)
CAUTION
!
To reduce the risk of injury from moving parts - Unplug
vacuum before servicing.
4.26 Clean the Turbo Tool by removing the two screws (A),
located on the bottom cover, with a Phillips head screwdriver.
4.27 Remove the bottom cover (B).
Clean out any debris or hair from the brushroll
and turbine fan.
4.28 Replace the bottom cover, insert and tighten the (2)
screws.
LUBRICATION
The motor and brushroll are equipped with bearings which
contain sufficient lubrication for their lifetime.
The addition of lubricant could cause damage. Do not add
lubricant to motor or brushroll.
Actual model may vary from images shown.
WARNING
!
How to Clean
!
!
4.26
A
4.28
12
4.25
A
4.27
B