Cord Rewind & Storage; How To Clean Tools; Maintenance - Hoover UH71250V Owner's Manual

CORD REWIND AND STORAGE
3.5 To return cord for storage, hold plug and press down
Cord Release Pedal (B) on side of cord reel.
WARNING
!
Hold plug when rewinding onto cord reel. Do not allow
plug to whip when rewinding.

HOW TO CLEAN TOOLS

To clean Hose and Turbo Tool, wipe with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using.
Familiarize yourself with these home maintenance tasks as proper use and care of your vacuum
will ensure continued cleaning effectiveness.
4.1 The System Check Indicator located at (A), alerts you to possible system performance issues.
PROBLEM POSSIBLE CAUSE
If System Check 1. Rinsable filter and/or filter made with HEPA
Indicator is red: media is dirty.
2. Dirt cup is full and/or clogged.
3. Cyclone filter assembly is clogged.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center
prior to continuing use.
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter, and
HEPA filter. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner needs servicing.
Actual model may vary from images shown.
3.5
!

4. MAINTENANCE

NOTICE
!
8
B
POSSIBLE SOLUTION
1. Clean rinsable filter and/or filter made with HEPA media
- reference pg. 9 and 10
2. Empty dirt cup - reference pg. 9
3. Clean cyclone filter assembly per pg. 10.
!
4.1
A