Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Farmet FANTOM CLASSIC FX 650 PS
Summary of Contents for Farmet FANTOM CLASSIC FX 650 PS
- Page 1 OPERATING MANUAL FANTOM CLASSIC FX 650 PS | FX 850 PS Edition: 3 | effective from: 1. 9. 2022 Farmet a. s. phone: +420 491 450 111 Id. No.: 46504931 web: www.farmet.eu Jiřinková 276 GSM: +420 774 715 738 Tax Id. No.: CZ46504931 e-mail: dzt@farmet.cz...
- Page 2 FANTOM CLASSIC FX 650 PS | FX 850 PS Dear customer, Semi-carried cultivators FANTOM are quality products of Farmet a.s. Ceska Skalice. You can fully utilise the advantages of your machine after thoroughly studying the operating manual. The serial number of the machine is punched on the production label and written in the operating manual (see Table 1).
-
Page 3: Table Of Contents
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS TABLE OF CONTENTS MACHINE LIMIT PARAMETERS ..........................4 Technical parameters ............................4 Machine weight distribution during transport ....................6 Safety statement ............................... 6 A. GENERAL INSTRUCTIONS FOR USE ........................7 PROTECTIVE EQUIPMENT .......................... -
Page 4: Machine Limit Parameters
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MACHINE LIMIT PARAMETERS • The machine is designed for soil cultivation up to a depth of 15 cm when agricultural soil cultivation. Another type of use exceeding the determined purpose is forbidden. - Page 5 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS AXLE IDENTIFICATION AXLE IDENTIFICATION PLATE AXLE IDENTIFICATION PLATE The axle identification plate can be read as follows: ITEM MARKING Axle identification code Order identification code Approval report identification code Maximum axle capacity data referred to the application and speed...
-
Page 6: Machine Weight Distribution During Transport
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MACHINE WEIGHT DISTRIBUTION DURING TRANSPORT PARAMETERS FANTOM CLASSIC FX 650 PS FANTOM CLASSIC FX 850 PS A → Weight at the drawbar (kg) 2500 3000 B → Weight at the axle (kg) -
Page 7: General Instructions For Use
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS A. GENERAL INSTRUCTIONS FOR USE The machine is made in accordance with the latest equipment state and approved safety regulations. However, dangers of user or third person injury or machine damage or creation of other material damage may arise during use. -
Page 8: Machine Transport Using Transport Means
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MACHINE TRANSPORT USING TRANSPORT MEANS The transport means designed for machine transport must have the load capacity minimally identical with the weight of the transported machine. The total weight of the machine is stated on the production label. -
Page 9: Machine Handling Using Lifting Equipment
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MACHINE HANDLING USING LIFTING EQUIPMENT The lifting equipment and tying means designed for handling of the machine must have their load capacity at least identical with the weight of the handled machine. -
Page 10: Work Safety Labels
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS D. WORK SAFETY LABELS Warning safety labels serve for operator protection. General: A) Strictly observe the warning safety labels. B) All safety instructions also apply to other users. C) Upon damage or destruction of the aforementioned "SAFETY LABEL" located on the machine, THE OPERATOR... - Page 11 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS The pressure vessel is under gas and P 42 H oil pressure. Execute disassembly and repairs only according to the instructions in the manual. Secure the machine against P 52 H unwanted movement by positioning on its working bodies.
- Page 12 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS Fig. 1 – Location of safety labels on the machine P20H P50H P39H P53H P20H P50H P13H P42H P101H P39H P37H P53H P53H P20H P37H P53H P100H P20H P20H P52H...
-
Page 13: Description
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 1. DESCRIPTION The FANTOM FX 650-850 PS machine is constructed as semi-carried. The basic version consists of a tractive pole with a TPS suspension bar with 36 mm or 60 mm pivots for the TPS 3 and KIROVEC category, or a loop for bottom hitch (51 mm, 71 mm or K80 hitch), a central frame with the transportation axle and... - Page 14 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS DIAGRAM OF THE HYDRAULIC SYSTEM OF FX 650 PS: Yellow circuit - axle Red circuit - folding/FLEXIBOARD White circuit - levelling disks/leg Blue circuit – front tools Green circuit - setting the roller depth + drawbar...
- Page 15 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS DIAGRAM OF THE HYDRAULIC SYSTEM OF FX 650 PS (HYDROTRONIC): Yellow circuit - axle Red circuit - folding/securing folding/leg White circuit - levelling disks Blue circuit – front tools Green circuit - setting the roller depth + drawbar...
- Page 16 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS DIAGRAM OF THE HYDRAULIC SYSTEM OF FX 850 PS: Yellow circuit - axle Red circuit - folding/FLEXIBOARD White circuit - levelling disks/leg Blue circuit – front tools Green circuit - setting the roller depth + drawbar...
- Page 17 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS DIAGRAM OF THE HYDRAULIC SYSTEM OF FX 850 PS (HYDROTRONIC): Yellow circuit - axle Red circuit - folding/securing folding/leg White circuit - levelling disks Blue circuit – front tools Green circuit - setting the roller depth + drawbar...
-
Page 18: Brake System
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 1.3. BRAKE SYSTEM 1.3.1. PNEUMATIC BRAKES • To operate the machine on roads, it must be equipped with a single-circuit two-hose brake system. • When the machine is equipped with brakes, they must be connected to the tractor when driving. -
Page 19: Hydraulic Brakes
3 – Brake cylinders ADR Æ 25/43 mm, lever length = 100 mm 4 – Length of the handbrake bar = 100 mm 5 – Handbrake lever, Farmet type, handbrake lever arm L = 175mm 6 - OLEAR membrane pressure accumulator, capacity 0.5l, ref: OLM/ELM 0.5-210/00 7 –... - Page 20 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 20 │ 48...
-
Page 21: Machine Assembly At The Customer
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 2. MACHINE ASSEMBLY AT THE CUSTOMER ▪ The operator must perform the assembly according to the instructions of the producer, best in cooperation with the expert servicing technician determined by the producer. -
Page 22: Aggregation To A Tractor
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 3.1 AGGREGATION TO A TRACTOR When connecting, no persons may stay in the space between the tractor and the machine. ▪ The machine can be connected only to a tractor, whose curb weight is identical or higher than the overall weight of the connected machine. -
Page 23: Hydraulics Connection
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS HYDRAULIC OIL SPECIFICATIONS The hydraulic circuit of the machine is filled with oil at the factory: Performance level: API GL 5; SAE 10W-30; SAE 80 Manufacturer’s specification: ALLISON C4; CATERPILLAR TO-4; VOLVO VCE WB 101; 97303 JONH DEERE 20C/20D ZF TE-ML 03E/05F/06E/06F/06K/17E/21F;... - Page 24 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS Fig. 3 – Hydraulic Circuits RED DUSTERS – electrohydraulic distributor, i.e., the support leg, control of side frame folding and securing (after control valve switching) ➢ 1 TAPE: support leg hydr. cylinder ejection, drawbar lifting...
-
Page 25: Hydraulics Control Panel
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 3.3 HYDRAULICS CONTROL PANEL • On the tow bar, there is a control panel with to 2 levers (according to machine equipment, the number of levers may vary). • By moving the levers, spherical valves in hydraulic circuits are switched or closed. - Page 26 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS Side roller closing valve lever (green circuit) Lever to the left The circuit of the side rollers is closed. The circuit of the central roller is open. It is possible to change the height of the machine (the height on roads must be below 4 metres, i.e., the machine is...
-
Page 27: Folding And Unfolding Of The Machine
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 3.4 FOLDING AND UNFOLDING OF THE MACHINE ▪ The hydraulics for the folding and unfolding must be connected to the double-action control unit. The operator must ensure that during folding and unfolding of the side frames, no person or animal is within ▪... -
Page 28: Machine Unfolding Procedure
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 3.4.1 MACHINE UNFOLDING PROCEDURE Tab. 5 – Work position of the machine Machine Unfolding Procedure – Work Position Initial condition: The machine is lifted on the axle (height up to 4 m), the side frames are secured with hooks, the spherical valves closed for transport, the switching valve is set to securing hooks. -
Page 29: Machine Folding Procedure
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 3.4.2 MACHINE FOLDING PROCEDURE Tab. 6 – Transport position of the machine Machine Folding Procedure – Transport Position Initial condition: The machine is unfolded and maximally lifted during the headland turn. All closing valves open,... -
Page 30: Side Frame Fojding Adjustment
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS Warning!!! The machine must only be transported by the axle, not rollers. 3.4.3 SIDE FRAME FOJDING ADJUSTMENT 3.4.3.1 FX650PS – 2 PISTON RODS The machine is folded by two piston rods that are not anchored to the central frame. The side frame plane against the centre is secured by end stops that must be set correctly. -
Page 31: Fx850Ps - 4 Piston Rods
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS ➢ The end stops below the folding joints must never touch the right and left side frame at the same time. Only the right or the left wing of the side frame can be touching. These are end stop positions that ensure the side frame is in the same plane as the central frame. -
Page 32: Machine Transport On Roads
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS ➢ The last thing to be set is the top end stops of folding, located below the piston rods that secure the frames during transport. The initial position is 9.1 cm from the head of the screw to the central frame plate. -
Page 33: Sharp Machine Projection
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS Checking the nuts on the transport axle • Use the plastic arrow “Check Point” to check for loose nuts. It promptly shows the condition of the nuts, whether they are loose or not. -
Page 34: Machine Adjustment
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 5. MACHINE ADJUSTMENT Working depth on the Fig. 11 – Machine adjustment Working depth on the rollers Working depth on tracing wheels Front tools Height of working discs 5.1 MACHINE WORKING DEPTH ADJUSTMENT ▪... -
Page 35: Ajustment Of Depth On Rollers
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS ▪ On all piston rods, the same washer combination must always be set according to the tables at the setting point!!! ▪ Specified working depths at individual positions are only for information. They may vary according to particular soil conditions. -
Page 36: Levelling Disc Adjustment
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 5.3 LEVELLING DISC ADJUSTMENT • Set the working depth of the directing discs using the hydraulic circuit (WHITE). Be careful when setting. • Correctly set discs ensure perfect levelling and covering with fine soil across the entire working width. -
Page 37: Farmet Hydraulic System (On Request)
6. FARMET HYDRAULIC SYSTEM (ON REQUEST) 6.1 SYSTEM DESCRIPTION The FARMET HYDRAULIC SYSTEM is an electric-hydraulic distributor that increases the number of hydraulic circuits of the tractor. It is additional equipment used mostly in places where the aggregated machine requires a higher number of hydraulic circuits that the tractor does not have available. -
Page 38: System Connection Diagram
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 6.2 SYSTEM CONNECTION DIAGRAM 38 │ 48... -
Page 39: Component Description
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS SYSTEM COMPONENT DESIGNATION OUTPUT 1 – CIRCUIT 1 CONTROL OUTPUT 2 – CIRCUIT 2 CONTROL OUTPUT 3 – CIRCUIT 3 CONTROL Electrohydraulic valve of CIRCUIT 1 Electrohydraulic valve of CIRCUIT 2... -
Page 40: Hydraulic Block
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 6.3.2 HYDRAULIC BLOCK Hydraulic distributor outputs Hydraulic distributor input Electrohydraulic valve cover 6.3.3 POWER SUPPLY • The system is powered by the tractor network • To ensure proper function of the system, the accumulator voltage must be within 12 V – 14.4 V /10A •... -
Page 41: Emergency
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 6.3.4 EMERGENCY A defect in the electrical installation or power supply of the tractor is considered an emergency. When the system is completely disconnected, switched off or defective, it is always possible to control the circuit of the support... -
Page 42: Machine Maintenance And Repairs
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 7. MACHINE MAINTENANCE AND REPAIRS Observe the safety instructions for treatment and maintenance. ▪ If it is necessary to weld during the repair and have the machine connected to the tractor, it must have disconnected supply cables from the alternator and the accumulator. - Page 43 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MAINTENANCE PLAN Perform the planned maintenance according to the instructions Maintenance Task Daily Once a Before After Time (season) week season season interval Machine in general • Visual inspection of the machine •...
- Page 44 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MAINTENANCE PLAN Perform the planned maintenance according to the instructions Maintenance Task Daily Once a Before After Time (season) week season season interval Bolt connections Visual inspection of bolt and hydraulic joints, tighten any...
- Page 45 Manual FANTOM CLASSIC FX 650 PS | FX 850 PS MAINTENANCE PLAN Perform the planned maintenance according to the instructions Maintenance Task Daily Once a Before After Time (season) week season season interval Electric cables Check for any damage, replace if needed Safety measures Lighting and safety hatched boards –...
-
Page 46: Machine Storage
Manual FANTOM CLASSIC FX 650 PS | FX 850 PS 8. MACHINE STORAGE Long-term machine shutdown: ▪ Store the machine under a roof if possible. ▪ Store the machine on a flat and solid surface with sufficient load capacity. ▪... -
Page 47: Environmental Protection
This provision does not apply to the replacement of wearable spare parts (see point 11.2.3). 12.2.8 The warranty is conditioned by using the genuine spare parts of the manufacturer. Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, On 9 September 2022, changes reserved. 47 │ 48... -
Page 48: Ce Certificate Of Conformity
CE CERTIFICATE OF CONFORMITY EG-KONFORMITÄTSERKLÄRUNG DÉCLARATION CE DE CONFORMITÉ СЕРТИФИКАТ СООТВЕТСТВИЯ ЕС DEKLARACJA ZGODNOŚCI WE Nous Мы Farmet a.s. Jiřinková 276 552 03 Česká Skalice Czech Republic DIČ: CZ46504931 Tel/Fax: 00420 491 450136 Vydáváme na vlastní zodpovědnost toto prohlášení. Hereby issue, on our responsibility, this Certificate.